I wonder if Wilson manifolds could open up the 6 barrel intake to max wedge port size? If they could, I'd use the trick flow 270s.
Trick flow 240 Heads with Factory Six Barrel Intake
- Thread starter SixBarrelBill
- Start date
Shiny
New Member
- Local time
- 1:32 PM
- Joined
- Jan 30, 2021
- Messages
- 3
- Reaction score
- 2
- Location
- San Cobble Dragways, B.C, Canada
A local guy (Peter Wille) did some work to his Six Pack intake to open it up to MW size. There is a Youtube video where its talked about but no info or footage of the work. Simpsons Speed Shop is the channel. Shows the engine on the dyno.
With some great advice from @68 HEMI GTS , I am looking at getting TF240 for my fresh 451. Being in BC Canada its about a $4000- bill for the heads. I also have a Six Pack with Direct Connection mechanical carbs.
With some great advice from @68 HEMI GTS , I am looking at getting TF240 for my fresh 451. Being in BC Canada its about a $4000- bill for the heads. I also have a Six Pack with Direct Connection mechanical carbs.
Wait until somebody can offer you a 10% off coupon at Summit Racing.
Similar threads
