Vent window removal

[c.moo]

This is on a 63 Plymouth b body sedan , How do i remove the vent wing assembly division channel and all , have side glass out and bottom and side bolts from vent wing assembly, some where on top or side is fasten , don't want to tear my vent wing seal up if i can , what holds it on at top of wing channel / frame ? Thanks

 

[Ron H]

With door panel removed you find find the screws also two bolts bottom under the door to remove the channel with vent. Be cautious with the bottom bolts (under the doors) as they may be rusted tight, I stripped one removing the bolt. Impact or shocking bolt might help but I'd let them soak a while with oil penetrant.

 

[Ron H]

With door panel removed you find find the screws also two bolts bottom under the door to remove the channel with vent. Be cautious with the bottom bolts (under the doors) as they may be rusted tight, I stripped one removing the bolt. Impact or shocking bolt might help but I'd let them soak a while with oil penetrant.

 

[c.moo]

View attachment 1336967

Already done that , screws or something has got it attach at top somewhere

 

[c.moo]

This is on a 63 Plymouth b body sedan , How do i remove the vent wing assembly division channel and all , have side glass out and bottom and side bolts from vent wing assembly, some where on top or side is fasten , don't want to tear my vent wing seal up if i can , what holds it on at top of wing channel / frame ? Thanks

Found it , there is a phillips screw on outside of door window frame across from top pivot / hinge , took off rubber out side seal and there it was , was looking inside top frame and channel for screw , don't show this in FSM .