Whats everyone working on?

[Black_Sheep]

Helping out my brother in law, I resealed the pan and replaced the water pump on his 340 (stroked to 418). He wants to freshen up under the hood, much like I did with the GTX.

 

[j-c-c-62]

I'm building set pieces for a school play, "Annie" at Broward Performing Arts Center.
Thanks for asking.

 

[Brandy]

Turning on water lines to the outside, replacing one gate valve on the side of the cabin that I got mad at and twisted off last fall, lol....So I had to cut it in the basement ceiling and pull it through the log wall and make another and slide it through and solder it on. Got the weed eater out, chain saws, lawn mowers, pressure washer etc...to get limbered up for the season...got the gas grill tank filled. Bought two stroke oil and trimmer line yesterday.

 

[icetech]

Just building computers as always.. BUT... i went to grab lunch and saw a Cream/white '62 Fury drive by.. which was a surprised i think it's the first 62 i have seen near me

 

[#41]

Finally rebuilding the front suspension in my 69 Charger 500. It has really needed it for a long time, but cracking brake hoses finally inspired me to git 'er done.

Addendum: Sheesh! I spent 6 hours today just working at removing rusted cotter pins. I needed a win before the end of the day so I removed the sway bar. Still 3 or 4 left, plus seized brake line fittings that someone has already taken a vice-grips to in the past. Gonna let everything soak in WD40 for a couple of days before attacking it again.

 

[71RRHI]

New exhaust from TTI for my convertible

 

[Don selleck]

just got my calipers rebuilt on the cuda, never seen goo in a caliper like that got some new rotors the old ones were way beyond safe. The passenger side bearing greese was like 50 weight oil and stringy, yes stringy, thought there was a piece of visqueen wrapped up in it. dug in deeper into the brake hydraulic system and stuck my finger in the bottom of my master, F--K. should have known. at this point I'm thinking complete redo, of the rest of it, Was hoping to test and tune the new motor soon since the weather is starting to break, but stopping the car is a good thing too! on a good note I did score on a jet high speed sander shaper for cheap.

 

[Chairman]

Working on the 62 Fury...... Also waiting for the 440 to come back from the machine shop as a 512.... Source 440 bottom end with Edelbrock RPM Performer top components and PRO-FLO Fuel injection. But in the meantime lots of things to do including getting new disc's with a power booster all the way around.... Getting a new heater core ordered today as the radiator shop price to re-core my old one is just too many $'s..... So a good time to clean up the plenum! But here is the new dash out of stainless with a complimentary new set of gauges that I think are really going to be nice! Didn't quite know what to do to clean up the push button shift area since using a new B&M. What do you other 62 guys think of doing it like this?

 

[Yennes]

Working on the 62 Fury...... Also waiting for the 440 to come back from the machine shop as a 512.... Source 440 bottom end with Edelbrock RPM Performer top components and PRO-FLO Fuel injection. But in the meantime lots of things to do including getting new disc's with a power booster all the way around.... Getting a new heater core ordered today as the radiator shop price to re-core my old one is just too many $'s..... So a good time to clean up the plenum! But here is the new dash out of stainless with a complimentary new set of gauges that I think are really going to be nice! Didn't quite know what to do to clean up the push button shift area since using a new B&M. What do you other 62 guys think of doing it like this?

View attachment 1675780

View attachment 1675781

View attachment 1675789

View attachment 1675790

View attachment 1675793

I zinc plated mine! Does not look the best but it will not rust again.

 

[JackR]

Don’t flame me….but I couldn’t resist having another orphan car project to do. Almost done with this one then on to the roadrunner again

 

[funknut]

Don’t flame me….but I couldn’t resist having another orphan car project to do. Almost done with this one then on to the roadrunner again

View attachment 1675819

One of the best looking Firebirds ever, IMO!

 

[OzCharger69]

Harley WLA 1942

Bought as a project. Infinite amount of hiccups. Mostly finished 2 months ago. Put 3000 miles on it already. Best motorcycle I've ever had.

Indian Big Chief 1926-28 will be my next bike.

 

[eldubb440]

Harley WLA 1942

Bought as a project. Infinite amount of hiccups. Mostly finished 2 months ago. Put 3000 miles on it already. Best motorcycle I've ever had.

Indian Big Chief 1926-28 will be my next bike.

View attachment 1675926

love it!

 

[Yennes]

Going to rechrome this lot

 

[Don selleck]

blasting the under trunk and engine compartment tomorrow

 

[Hemirunner]

Just got loose parts painted.

 

[426LVR]

Just to get it going --- What is everone working on?

Just about have the 70 Hemi RR over the finish line. She is pretty.

 

[Don selleck]

thats nice!

 

[Don selleck]

got it started

 

[#41]

I'm one day into the the Ms. being outta State for 3-1/2 weeks. Today I accomplished absolutely nothing. Tomorrow looks promising also.