Wire removal from wiper motor

[Vanderstel]

How do I remove these three wires from the motor (see arrow)? They seem to go inside the motor case.

I'm replacing the engine/lighting harness with a new one.

 

[493 Mike]

I don't believe any company will include the wiper motor feeds as it will require complete disassembly of the motor to replace them. It certainly can be done, if not by you a motor rebuilder could.
Mike

 

[copper67sat]

I replaced the wiper harness on my 67 Satellite with one from the junkyard because my original had been cut to add a delay box. Definitely had to open the motor cover and may have had to solder in the replacement. Pretty sure I pulled the motor off the car to do it. Been a long time so I don't remember the details.

Your wiper motor looks very similar to mine. Mine has 2 nuts on long studs that hold the cover on. I removed the nuts and was able to pull the cover off to access the wiring.

 

[Topher]

The motor needs to be taken apart and the harness replaced from where it attaches to the magnet wire.