Search results for query: *

No BS, different pri resistance causes ECU to run hot, electronics run hot, shut down. New wiring harness, new ECU, new ballast. All points to bad coil, measured the pri side last night .2 ohms, secondary is 20k. cheap swap out will solve the mystery I guess

Do you know what coil I would use? I could get the specs off the original one maybe

Hi guys, need once again some hrlp on replacing my coil, got a 383 w/electronic ignition (reluctor distributor) and need to know the primary resistance before I can purchase. I was looking at them and it seems they can be either .3-4 , .6 or 1.5 ohms on the primary side, Im loooking at MSD...

I'll try the 1" trick and see how much is in there, I think there is plenty as the splines are fully in contact with both pieces, carrying the torque

I take it that 50.8" is from center to center of the u joints? I have one thats 50" from a 75 Cordoba and it seems to be about 2" short, It fits and runs and drives but the look of the spline in the tranny seems to look like it could go in about 2" more. I mean, there is lots of meat on the...

Can anyone tell me the length of driveshaft I need for a 72 Satellite with a 383 and an 8.25 rear end? Its a hodge podge of differentparts so its hard to look up, also looking for a strata vent controller for non ac...if you got one Thanks in advance for any info you got

Where did you find the bearing? I need to change the same one, did you have a part number?

well just for follow up, we tore the tranny apart and short of pulling it in half with the frame machine, the input shaft would not come out of it, jammed in and ended up rebuilding a cre I got for $75 bucks, if you need parts let me know, as long as they are not behind the input shaft

In need of a few final parts, 72 satellite strata vent non air heater controller rear window trim outside, good shape, all three pieces front signal light lenses, amber good shape jack foot Ottawa Canada preferred but shipping to 13669 is ok too Thanks in advance

I think if you go in person, you can buy the vehicle information package on the car for $16 bucks You need the VIN for sure though

no kiddin, I have 1080 hours in the car , rotisserie and the tranny is giving me greif, had it running yesterday and it wont go backwards uggggh! https://www.facebook.com/pages/Roadrunner-Revival/715264695254497

Yup, after it wouldnt go backwards I tried to push it forward and away it went....real easy pushing it forward , but wont move backward at all, so weird.....

Like I said in my first post, I removed the driveshaft and it rolled back and forward fine

nope, not changing gears, just roll it forward and it rolls, roll it backward, it doesnt roll

Wondering if any of you ever seen this! the 727 trans did something weird today, I was pushing the car outside with the car in neutral, I pushed it forward no problems, then tried to push the car backwards and it wouldn't move , at all!!!!. We had to remove the driveshaft and it was fine...

Thanks, I thought there was nothing in it and your now the third guy to verify, problem solved, it shall flap in the wind :)

Hey Guys, need some help, what does this screw mount to? Is there a small bracket that mounts to the rear seat metal area or does the screw go into the side of the car? Car was stripped when I got it, your help would be appreciated I attached a pic that I found of the area and circled the...

do you still have this bumper, if so where are you located?

Thanks and if you need some reference pics feel free to grab some..

So I have been building a 72 Satellite for a year now and thought ID create a facebook page for it. The intent of this page is to motivate others to start a project, mine was quite big. The car was a basket case but wanted to show that you can fix em if you want. I had lots of time, and...