Search results for query: *

Huge difference!! I changed my 383 from two to four barrel... Holley 4160 770 CFM and a Performer RPM intake... I have stock exhaust manifolds dual pipes.. i need headers to fully benefit though.. On my 70 Coronet I had to use a K&N low profile air cleaner... the Performer RPM Dual Plane is...

I agree.... a good chrome job is three layers ( tin, nickel, chrome) and lasts decades.

If you try to push fuel into the bottom it will place huge strains on the pump. The gas is trying to push out and the pump is trying to push it back in. I dont run return lines on gas, only diesel. Why the return line? Electric pumps run on demand..stop running when the float in the bowl lifts...

ok.. and what brand plug wires are those...? lol

I hate Time Warner too..... been thinking of going to Dish.

:))) Come to think of it... and it's been a long time... 25 years.. I used to own a '66 Charger.. almost forgot. And a '72 Fury 2 door.. BIG interiors... :))

well if you dont know what a battery is..."two diff metals touching or close enough to pass and flowing electrons" and that is what electrolysis is (A chemical reaction) and corrosion is the result. Use that stuff on similar metals fine. You go and sink a stainless screw in to aluminum and let...

70 coronet. Freeway cruiser. I too have a 383 with 2.76 gears. The 383 was a 2 bbl. It sucked gas bad and even though I rebuilt the carb it still sucked. I ran hot. 200+ degrees. I put a edelbrock performer rpm and a holley 770 cfm 4160 vac secondary with down leg booster venturis from som...

Ground is an AC term for the green non current conducting safety wire that goes to "earth" for safety. ...no grounds in DC wiring. It is a "negative". You are not "grounding" anything in DC wiring...You are completing a round trip for the electricity, pos and neg, in a circle, not dissipating...

Me too!!! I go on road trip and would love a bigger tank!! Thirsty beast!!

my two cents; Delo 400 40 wt and .040 gap with pertronixelectronic ignition.

70 is a one year only wheel. Pebble finish and it fits the column different because the ignition key is is on the column in 70 and on the dash in 68/69. I scoured all the pieces for mine from EbaY. It took alot of patience. I saw a complete wheel go for 600.00... be patient and persistant you'll...

copper based paste anti sieze is not anti sieze... copper is conductive and that stuff is for increasing conductivity on battery terminals and electrical crimp terminals/connections... omg don't use it for anti sieze it'll do the opposite :) As far as the mainifold bolts, I found out about...

A good chrome job is many layers...depends what one is chroming. Ferrous metals (steel) vs brass, zinc. First they (steel) must me acid cleaned. Tinned, nickel, then the final chrome layer. Some cheapo places just clean then chrome dip. Study up...watch out! And chrome is a lot of work to...

Love the Quad Door! back doors are needed to stick ones legs out while using the back seat for it's intended purpose...Two door guys; If you have no use for the back doors...well... I'm so sorry.. :)

I used to have a '66 Charger... orange. when I was 19... I'm lucky to still be alive. Great car. Nice arty pics.

Great cars....considering they're only 2 doors.. ;)

This guy was VERY helpful to me, when I needed one for my '70 Coronet 4 door. http://www.franbishopracing.com/ You have it pretty easy :)