WTB 69-70 LCA bbody pivot pins nos or new USA.

[B-Body 70]

Looking for these pins new us made. Anyone have a lead on these pivot pins and nuts washers? Pro forged is Taiwan new.
Tony

 

[R/T Boy 67]

Firm Feel inc.

 

[WileE]

Try Craig at mobileparts, he's on the site here.

 

[hemi71x]

Control Arm Lower Pivots

Take your pick.
Another guy asked about these parts, too, over in the suspension forum.


This guy has a pair of them for sale, over on ebay, a bit damaged, but not critical, when the bushing is on that shaft.
Mopar Lower Control Arm Shafts Spindles | eBay

 

[B-Body 70]

Try Craig at mobileparts, he's on the site here.

Yes I did Craig dose not do the pins not available. Well I like new but will use the old before I go with pro forged

 

[copper67sat]

I bought a new pair of pivots from Mancini early last year. Not sure where their's are made. I had issues with them fitting the bushing so ended up reusing my OEM ones for my 67. I could only get them about 1/2 way onto the bushing before they jammed and wouldn't go any further. Actually buckled the pipe I was using in my press. Measured the Mancini pivots and they were ~.002" larger dia. than OEM and didn’t have as much of a bullnose on the end.

Mancini LCA pivot shaft problems

My OEM units slid right on. I recommend good used OEM if yours are trashed.

 

[B-Body 70]

I bought a new pair of pivots from Mancini early last year. Not sure where their's are made. I had issues with them fitting the bushing so ended up reusing my OEM ones for my 67. I could only get them about 1/2 way onto the bushing before they jammed and wouldn't go any further. Actually buckled the pipe I was using in my press. Measured the Mancini pivots and they were ~.002" larger dia. than OEM and didn’t have as much of a bullnose on the end.

Mancini LCA pivot shaft problems

My OEM units slid right on. I recommend good used OEM if yours are trashed.

I've herd of that. Pro Forged Taiwanese supposably are a good press fit according to A Body Bill in Michigan on his 69 runner.