69 Satellite

[donm]

yes yes yes,,,apologies

No prob, I see your out in cali. I use to live in fairfield and woodland, not far from your area. One of the best places Ive been, best of all NO salt on the roads.

 

[donm]

Primer x2 coats, little trash in it, but its primer. Overall looks pretty good, couple small dings, should be minimal work for finishing. Paint guy was out so have to get the toners mixed up next weekend.

 

[joseph p.]

No prob, I see your out in cali. I use to live in fairfield and woodland, not far from your area. One of the best places Ive been, best of all NO salt on the roads.

Yes in 1/2 hour from Fairfield.

 

[donm]

I was able to get my toners mixed up today. 2 gallons of unreduced base, more than i will need.

 

[donm]

If anybody has a B3 car. This is from Sherwin Williams ATX 3.5voc system. Chip number is 5-2-8400-00. Very close with it being a modern system.

 

[donm]

Well, took the hood back off to try and fix my dumb mistake from hinges last fall when i put hinges "from another car" on on they didnt move but the hood did. I shouldve checked for free movement first, but too late now. It seems pretty close with the strap holding pressure. I think it might need a small strip welded on underneath where the access hole is. White hood pic was how bad I bent it

 

[donm]

Here is where I was thinking a small strip to provide support. Anyone had to do this before, suggestions? Its weakened the opening from the initial bending and each time I close the hood that spot flexes.