Reccomend me a stroker kit.............

[catfish774]

440 over .30, 62 Belvedere 4dr, auto trans...............I want a good reliable street car, no drag strip duty. And I have a set of old school long ram manifolds I want to use.

 

[Lionized]

http://www.hotrod.com/how-to/engine/hrdp-9809-451-mopar-stroker-engine-build/
http://www.hotrod.com/how-to/engine/ccrp-1211-rb-series-mopar-440ci-engine-upgrade-to-512ci/

 

[383man]

There are alot of stroker kits out there. I used the 440Source 4.15 crank kit to build my 493 which has been in my street car since 2011 and holding up great. Ron

 

[TetanusShot]

I betcha that factory crank and stock displacement could meet your power/streetability goals. As a bonus, ya wouldn't have to buy chinese!

Sorry, couldn't resist making an argument for 'Murican made stuff, carry on...

 

[catfish774]

I got what I needed from a fellow Moparite. Now the fun starts.

 

[rrTor-Red]

I got what I needed from a fellow Moparite. Now the fun starts.

What did you get?

 

[FlagCraig]

Hughes Engines

 

[MOPOWER871]

stay away from Eagle 4.15 stroker cranks the rear seal knurl is cut to deep and have been reeking havic for years. to bad i found out the hard way. they say the rule of thumb is smooth lip seal knurl rope seal. I did from the getgo and it still leaked.to bad i didn't read about this problem before I built my 493 did a search on the net and walla ! pages and pages of problems.spend the bucks and get a real crank, Callies ,Oliver .as they say "pay for it now or you'll pay for it later ". good luck