Search results for query: *

Did you mean to say that you have PS and hydro boost brakes? Mike

I have switched to ATF+4 in all my TFs. After reading comparison specs I see no reason to use Dexron. Mike

210* is not even hot enough to boil water. Just like engine oil, transmission oil has to boil off any moisture from condensation. Mike Mechanic Base https://mechanicbase.com/transmission/normal... What Transmission Temperature Is Considered Normal? Most modern automatic transmissions are meant...

It was cute but, I have never drank JB. I like blended whiskeys! Mike

Would it matter? Mike

Hose clamp. Mike

I just looked up your cost but, your inbox is full? Mike

ZIP code? Mike

When I removed the gasket on my 65 it was set over a strip of white foam-I think closed cell. Maybe 1 1/2" wide, full length of horizontal flange. I believe it took the place of butyl caulk. Mike

I will send you both sets of my take-offs if you pay postage. If more folks chime in you may be able to construct 2 full sets-cheaply. Mike

Feel the heat in the heater hoses before and after the valve. Mike

Usually driving a car with a problem like yours will eventually show the trouble but, it may be more costly to resolve. Mike

Any time you have to pull things together with bolts or nuts, you are missing something/costing yourself money. Mike

I would like to have it prelubed also! Mike

I found a digital voltmeter with a USB port online for-$10.00. It is in the blue console next to the tissue box hole. Mike

I have built 2 consoles for myself. One wood and one steel. Cup holders are available at marine stores and online. Start a self-made console with a cardboard model. I liked the 1/2" MDF board to work with for the wood unit. My wife sewed up the blue vinyl cover for me and for the steel console I...

Draw us a schematic. Mike

A idle solenoid should not retract until the ignition is shut off. If the engine is warmed up the choke fast idle cam should be fully released to allow the curb idle screw/solenoid to control the curb idle speed. Is all this occurring when the engine is fully warmed? Mike

I always like to fabricate my own. I do not understand why so many folks are ignorant to the wiring (of cars or houses). It is not "rocket science" and many sources of educational materials are available to learn from. Mike

I wanted one too. So, I built one. It will do 48"+. I concur with using a SM shop. I have had drive shaft tunnels built for projects myself. Mike