supergluehero
Well-Known Member
I've been unemployed for 7 months now, so I'm trying to work with what I've got, but the temptation is there.
72 Satellite Gen III Hemi Restomod
- Thread starter supergluehero
- Start date
supergluehero
Well-Known Member
So the permatex seems to have been somewhat successful. Not sure how it will hold up long term, but OK for now. I reassembled everything. Knowing it might have to come back apart, I just used hot glue and a zip tie. If it works long term, then I guess that's the permanent solution.
I still hear the hiss of a vacuum leak, but honestly I'm not sure how much of that is normal. All the dampers are moving like they should and the switch is stopping in the right spots. One thing that I've noticed is that the vent setting blows super strong through the vents, but on heat, I can barely feel it. I've got a triangular section in the heater box that has hot air blowing out while on heat, but not vent. Is this normal? Seems odd since the adjustable vent in the box is right next to it.
The vent on the driver side has some air coming out on heat, but not as much. If this is by design, then it makes a lot of sense why the dash vents seem so much weaker.
I still hear the hiss of a vacuum leak, but honestly I'm not sure how much of that is normal. All the dampers are moving like they should and the switch is stopping in the right spots. One thing that I've noticed is that the vent setting blows super strong through the vents, but on heat, I can barely feel it. I've got a triangular section in the heater box that has hot air blowing out while on heat, but not vent. Is this normal? Seems odd since the adjustable vent in the box is right next to it.
The vent on the driver side has some air coming out on heat, but not as much. If this is by design, then it makes a lot of sense why the dash vents seem so much weaker.
Similar threads
