727 push button trans woes!

[dvw]

Pretty sure I'd have parts. Is the output shaft itself OK? I fixed the same failure for a customer this summer,
Doug

 

[1967gtx]

Pretty sure I'd have parts. Is the output shaft itself OK? I fixed the same failure for a customer this summer,
Doug

Output shaft appears to be OK except for a few bruises, will post some pics!
Gary

 

[Ceedawg]

Yes...

It’s an emergency brake and WHAT does it have to do with being in park?

 

[dvw]

What did you end up finding?
Doug

 

[1967gtx]

What did you end up finding?
Doug

Cracked rear pump housing, broken park gear, vaporized governor mechanism. A&A(Rick) hooked me up with everything! Put in spacer to eliminate gov. made plate to replace park mechanism cover. Removed all the mech. Back together - working fine sitting on jack stands, waiting for snow to go and dry roads for test!
Gary

 

[dvw]

Weremived the governer and thinned the park gear down to 1/4" wide. Also trimmed off part of the snap ring boss in my racecar. Then cut a new groove in the output shaft, so no need for the spacer. If you ever decide you need park. I have a good source of parts.
Doug

 

[1967gtx]

Weremived the governer and thinned the park gear down to 1/4" wide. Also trimmed off part of the snap ring boss in my racecar. Then cut a new groove in the output shaft, so no need for the spacer. If you ever decide you need park. I have a good source of parts.
Doug

View attachment 1797033

I have extra park mechanisms and cables. I will be 78 in March, maybe the next guy will park it? LOL!
Gary