ckessel
Well-Known Member
No major issues, just getting the fit as good as I can. Not quite hugging the floor around it but some other that is the Nutserts not being flush with the metal they are installed in. Sit up close to an eight. Could buy some dies from Hammer Fab so they don't stick up but those are spendy. Add in the trunk floor above the frame rails isn't perfectly flat. Can't do the hammer/dolly routine to flatten out. So I got it as good as possible. I had an idea about finding some door edge guard material, U shaped, to slip over the edges of the cover. Will mess with that later.
Riv Nut Recess Dimple Die Set - 4 Piece
Riv Nut Recess Dimple Die Set - 4 Piece
