What did you do to your Mopar today?

[Ron 73]

My carburetor on the 73 started to jump up and down, loose bolts (stripped) on the very old Eddy intake soooo i mixed up and after cleaning everything real good JB-welded in my intake bolt's (threaded shaft's) and hope to get carb back on tomorrow, If that don't work, i have another intake almost ready to go on....... Film at 11, sounded good anyway

 

[1948 santa]

Why not Heli-Coil it?

 

[Dennis H]

Drove home from Reno over Carson pass in moderate rain with foamy slick roads. Got 19.86 MPG!

 

[snakeyes]

had a couple of beers with it :icon_pidu:

 

[1948 santa]

Installed NOS speedo cable and housing that I got at Carlisle in July today on the 69 Road Runner.

 

[bobtile]

This
http://youtu.be/za_ZJWHMYdg

 

[CudaChick1968]

Not my car as usual but ...

Packed these up ... they're shipping out to the Chicago area today.









You'll have to wait and see which FBBO member's car they're going on. Neener neener

 

[Budnicks]

Very nice job on the VC's Leanne,
those look almost/allot like the ones on MarPar's GTX IIRC
but no Blue Penastar

 

[snakeyes]

had a :VB toast: and then read this thread and here's :VB toast: for all of you

 

[Photon440]

Thanks for the beer, snakeyes.

Stripped my engine compartment then squirted purple on it yesterday.

 

[Phils68RR]

Was going to start 68RR but found oil pan leaking (hole in side of pan), dropped steering link and dropped pan new one in by this thusday, hopfully get the car finished by Hot Rod Power tour date. Still have brakes, interior, gas tank, to do.Phil from Corpus

 

[CudaChick1968]

How'd ya know I needed a beer Snakeyes?? Thank you!

Budnicks, they're pretty close but these have only four colors instead of Mario's six. They were tough to box up and send out ... Thanks for the compliment!

 

[sleepar]

Been playing with the pulley set up.... want to keep the 67 LA cast iron water pump..... dug out some pulley system for a 60 ford and the 2 1/2" pulley may clear the a.c. belt.... and I have a 4 groove crank pulley.... I have been over it a dozen times and its getting closer..... thinking about a longer dowl pin and cutting up the aluminum spacer and puting some under the longer pulley.... Or maybe put it stock and grind an ear off the Eddie heads... 67 LA loaded is really really really fun... really

 

[Dennis H]

Was going to start 68RR but found oil pan leaking (hole in side of pan), dropped steering link and dropped pan new one in by this thusday, hopfully get the car finished by Hot Rod Power tour date. Still have brakes, interior, gas tank, to do.Phil from Corpus

Thought it was in June?

 

[Cman]

Just drove my 66 Coronet for the first time :hello2: A short run back from the shop after having the trans rebuilt, the reverse band let go as it was delivered :angry9: Also got it passed the UK MOT/roadworthiness test, so now I can get it properly registered :happy3:

 

[sleepar]

Wireing came... messed around with the exhaust... found some more pulleys... it's a see/ saw... 10 steps ahead 2-3 backwards.... but it's getting there...

 

[bobtile]

Packed these up ... they're shipping out to the Chicago area today.

View attachment 203367

View attachment 203368

View attachment 203369

View attachment 203370

You'll have to wait and see which FBBO member's car they're going on. Neener neener

WOW! those are gorgeous! (is that how you spell that?)

- - - Updated - - -

Putting a clutch in the kids Dodge Stealth. It's sort of a Mopar!

 

[Budnicks]

How'd ya know I needed a beer Snakeyes?? Thank you!

Budnicks, they're pretty close but these have only four colors instead of Mario's six. They were tough to box up and send out ... Thanks for the compliment!

you earned it !!

 

[Cranky]

Looked at it like I do almost everyday. However, I did gather up some parts that I want to work on before sticking them on the car....

 

[CudaChick1968]

Thanks Bobtile and Budnicks! Kevin's email said he'll be installing them later in the fall so we all get to wait for more pictures.