And add a couple main webs while you're at it.
LS swap ?
- Thread starter ed-shot500
- Start date
Personally, I think it's a waste of money, but theirs to waste.
I have a garrett turbo that was set up on a slant six that will be in my 34 dodge brothers truck with a slant six that has already been fitted in the engine area. I have this project back burnered on me several times. hoping next winter will be the time to start on it again. sealing the heads are one of the issues, and if the cast pistons are replaced 500 hp has been achieved, with timing retarders, blow off valves. I have (3) slant six engines i paid 300 or less for each and two of them had 904's attached to them and they all run. the one that has bben fitted in the truck has 34k original out of a 64 valiant. It has ls motor mounts in it 
- Local time
- 4:14 AM
- Joined
- Dec 4, 2009
- Messages
- 36,343
- Reaction score
- 48,310
- Location
- Pasadena, Texas
GM has always been that way.....millions of parts for them in the wrecking yards. Personally, I'd rather drive something that every Tom, Dick and Harry DOESN'T drive! Thing is, I like Mopars vs Fords and Chevys.i 100% LOVE ls's.... but hate seeing them in every car non stop.. i get why though
- Local time
- 2:14 AM
- Joined
- Mar 14, 2012
- Messages
- 19,341
- Reaction score
- 40,398
- Location
- Surrey, B.C. Canada
Those flexible rods are needed to provide cushion to the four main bearings.
No doubt.Those flexible rods are needed to provide cushion to the four main bearings.
- Local time
- 4:14 AM
- Joined
- Dec 4, 2009
- Messages
- 36,343
- Reaction score
- 48,310
- Location
- Pasadena, Texas
I have an LS swap. In a Camaro. And I did it almost 15 years ago before everyone was doing it. I had to make a lot of parts and custom wiring. Now it’s all on eBay for 1/4 of what I spent.
But…..would never even consider that in any mopar. But I certainly would do a mopar crate engine conversion into any mopar.
But…..would never even consider that in any mopar. But I certainly would do a mopar crate engine conversion into any mopar.
- Local time
- 4:14 AM
- Joined
- Dec 4, 2009
- Messages
- 36,343
- Reaction score
- 48,310
- Location
- Pasadena, Texas
I'm guessing @ed-shot500 ran and hid since the pitch forks and torches never did go away....what is it with the GM guys coming here and asking questions about installing LS engines in Mopars anyways and then gripe when they get torched lol?? I know I have a GM question but it's about a GM vehicle.....
Coelacanth
Well-Known Member
- Local time
- 3:14 AM
- Joined
- May 10, 2024
- Messages
- 979
- Reaction score
- 1,471
- Location
- Edmonton, Alberta, Canada
No...just no. People put V8's in Grand Nationals and that's almost as puke-worthy.
- Local time
- 4:14 AM
- Joined
- Dec 4, 2009
- Messages
- 36,343
- Reaction score
- 48,310
- Location
- Pasadena, Texas
Thinking that it would be faster?? Geeez!
Coelacanth
Well-Known Member
- Local time
- 3:14 AM
- Joined
- May 10, 2024
- Messages
- 979
- Reaction score
- 1,471
- Location
- Edmonton, Alberta, Canada
Sure, but a twin turbo LS7 swap is just sacrilege to the original platform. Plop that in ANYTHING and it'll be faster, for sure. Meh...
- Local time
- 4:14 AM
- Joined
- Dec 4, 2009
- Messages
- 36,343
- Reaction score
- 48,310
- Location
- Pasadena, Texas
I've never been a numbers matching type but I sure ain't going to take a vehicle like that and modify it. For example a 440 4 speed 71 Cuda is going to stay that way and I'll buy a plain Jane 318 Barracuda to modify....
there's a 70 barracuda on BAT right now with a hellcat swap six speed, owner put coil overs on it. In-Violet, (pcp) doesn't look like much reinforcement under it. definately no sticky tires
340runner
Well-Known Member
I know you posted this forever ago....
But I just had to show something.
It's been up for a lot more than 2 months too...
BeepBeepRR
Well-Known Member
Oh wow I know the future. LMAO
340runner
Well-Known Member
Yeah, that thing is going to sit on marketplace forever, 40 grand for that bastardized car is wild.
I don't understand, why a Ford 8.8 out of all the rear ends that you could get from mopar
I just don't get it
A STOCK truck engine???
Could've tossed in a 3rd gen hemi, but no, LS the world i guess
- Local time
- 2:14 AM
- Joined
- Apr 13, 2012
- Messages
- 39,906
- Reaction score
- 147,615
- Location
- Granite Bay CA
How do you know that the abortion listed above is the same car and same guy? The OP listed his location as Florida, that sales listing is Indiana.
Coelacanth
Well-Known Member
- Local time
- 3:14 AM
- Joined
- May 10, 2024
- Messages
- 979
- Reaction score
- 1,471
- Location
- Edmonton, Alberta, Canada
I would puke on that engine. And it'd be an improvement.
Similar threads
