Search results for query: *

When I removed the gasket on my 65 it was set over a strip of white foam-I think closed cell. Maybe 1 1/2" wide, full length of horizontal flange. I believe it took the place of butyl caulk. Mike

I will send you both sets of my take-offs if you pay postage. If more folks chime in you may be able to construct 2 full sets-cheaply. Mike

Feel the heat in the heater hoses before and after the valve. Mike

Usually driving a car with a problem like yours will eventually show the trouble but, it may be more costly to resolve. Mike

Any time you have to pull things together with bolts or nuts, you are missing something/costing yourself money. Mike

I would like to have it prelubed also! Mike

I found a digital voltmeter with a USB port online for-$10.00. It is in the blue console next to the tissue box hole. Mike

I have built 2 consoles for myself. One wood and one steel. Cup holders are available at marine stores and online. Start a self-made console with a cardboard model. I liked the 1/2" MDF board to work with for the wood unit. My wife sewed up the blue vinyl cover for me and for the steel console I...

Draw us a schematic. Mike

A idle solenoid should not retract until the ignition is shut off. If the engine is warmed up the choke fast idle cam should be fully released to allow the curb idle screw/solenoid to control the curb idle speed. Is all this occurring when the engine is fully warmed? Mike

I always like to fabricate my own. I do not understand why so many folks are ignorant to the wiring (of cars or houses). It is not "rocket science" and many sources of educational materials are available to learn from. Mike

I wanted one too. So, I built one. It will do 48"+. I concur with using a SM shop. I have had drive shaft tunnels built for projects myself. Mike

Definitely too much gap. Mike

Does the pin in the solenoid stroke easily by hand? Will it snap out with 12 volts applied? Is the wire supplying battery voltage? Mike

Or longer bracket. Easy welding project. Mike

On jack stands, pull the drive shaft and seal up the extension housing to keep the mess down or drain the transmission. Disconnect shift and throttle pressure linkages and electrical connections, pull the starter and front dust cover and remove converter bolts (I use a long wrench to position...

Cables and Casings - Bobs Speedometer Mike

What? Mike

Do check. You may consider a new set of springs. Mike

The dashpot is a "shock absorber" for the throttle closing. It slows closing to prevent stalling and (I think for emissions). If you are referring to the idle solenoid, that is designed to increase idle rpm to carry the extra load of the A/C compressor. Mike